DS3231-ARDUINO KEYPAD CLOCK

DS3231 CLOCK WITH ARDUINO LCD KEYPAD CODE

//CODE
//Maiden Arduino project by  'VU2WSX' GENERAL GRADE RADIO AMATUER FROM INDIA
//Arduino clock with highly accurate RTC DS3231 with LCD keypad
//Un comment the lines to bring active
#include <Wire.h>
#include "RTClib.h"
#include <LiquidCrystal.h>
#include "LCDKeypad.h"
RTC_DS3231 rtc;
// The LCD screen
LCDKeypad lcd;

char daysOfTheWeek[7][12] = {"Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"};

void setup ()
{
  Serial.begin(9600);
  delay(3000); // wait for console opening
   lcd.begin(16,2);
   lcd.print("Name");//Type your name
   
   delay(3000);

  if (! rtc.begin()) {
    Serial.println("Couldn't find RTC");
    while (1);
  }

  if (rtc.lostPower()) {
    Serial.println("RTC lost power, lets set the time!");
 
  // Comment out below lines once you set the date & time.
    // Following line sets the RTC to the date & time this sketch was compiled
   // rtc.adjust(DateTime(F(__DATE__), F(__TIME__)));
 
    // Following line sets the RTC with an explicit date & time
    // for example to set January 27 2017 at 12:56 you would call:
     //rtc.adjust(DateTime(2017, 1, 27, 12, 56, 0));
  }
}

void loop ()
{
  //Remove the comments for diplay blinking
 // lcd.clear();
 //delay(500);


    DateTime now = rtc.now();

    DateTime future (now );//+ TimeSpan(7,0,0,30));
   
    Serial.println("Future Date & Time (Now + 7days & 30s): ");
    lcd.setCursor(0,0);
    //lcd.leftToRight();
      if( future.day()<10)
   lcd.print("0");
    lcd.print(future.day(), DEC);
    lcd.print('/');
    if( future.month()<10)
   lcd.print("0");
    lcd.print(future.month(), DEC);
    lcd.print('/');
    lcd.print(future.year(), DEC); 
    lcd.print(' '); 
    lcd.print(daysOfTheWeek[now.dayOfTheWeek()]);
   
    lcd.setCursor(4,1);
    if( future.hour()<10)
   lcd.print("0");     
   lcd.print(future.hour(), DEC);
   lcd.print(':');
 
   if( future.minute()<10)
   lcd.print("0"); 
   lcd.print(future.minute(), DEC);
   lcd.print(':');
 
   if( future.second()<10)
   lcd.print("0");
   lcd.print(future.second(), DEC);
   
    delay(1000);
   // void loop() {
 // Removebottom comments to activate the commands for scrolling display
    // scroll one position left:
        //lcd.scrollDisplayLeft();
    //lcd.scrollDisplayRight();
     // wait a bit:
   // delay(100);
 
}

Automatic antenna tuner -Skanti

 Bottom view

Top View

Skanti 250 Watt HF automatic antenna tuner ATU  (Marine)

Prasar Bharati Parivar: Our bright children: D/O Shri. S.Elangovan, ADE AI...

Prasar Bharati Parivar: Our bright children: D/O Shri. S.Elangovan, ADE AI...: My second Daughter completed her 2nd year B.Tech and moving to 3rd year. She is the one among the two siblings representing Indi...

Prasar Bharati Parivar: Our bright children: D/O Shri. S.Elangovan, ADE AI...

Prasar Bharati Parivar: Our bright children: D/O Shri. S.Elangovan, ADE AI...: My second Daughter completed her 2nd year B.Tech and moving to 3rd year. She is the one among the two siblings representing Indi...

ICOM IC718 Mains SMPS

IC718 Power Supply Suitable for Mains operation Set voltage for 13.2 V

IC 718 RIG CONTROL INTERFACE SCHMATIC

IC 718 RIG CONTOL INTERFACE ACHMATICS